A High-Quality and High-Performance MIPI Camera Module for Mobile Devices.

A High-Quality and High-Performance MIPI Camera Module for Mobile Devices.

A High-Quality and High-Performance MIPI Camera Module for Mobile Devices.

If you are looking for a MIPI camera module that can deliver stunning images and videos with high resolution, high dynamic range, and low noise, you may want to consider the Ultra HD 16MP S5K3P9 Autofocus WDR Wide Dynamic Smartphone Tablet Camera Module. This MIPI camera module is based on the S5K3P9 sensor, which is a 16-megapixel CMOS image sensor with a 1/2.8 inch optical format and a pixel size of 1.0 μm. The camera module supports MIPI CSI-2 interface, which is a standard protocol for mobile devices that controls communication between the device’s processor and its peripherals.

One of the advantages of this MIPI camera module is that it has an autofocus function, which can automatically adjust the focus of the lens to capture sharp and clear images. The autofocus function is based on a voice coil motor (VCM) driver, which can control the movement of the lens with high precision and speed. The camera module also has an infrared cut filter (IRCF), which can block infrared light and improve color reproduction.

Another advantage of this MIPI camera module is that it has a wide dynamic range (WDR) function, which can enhance the contrast and details of the images in different lighting conditions. The WDR function is based on a high-performance image signal processor (ISP), which can perform functions such as exposure control, white balance, noise reduction, color correction, etc. The camera module also supports YUV and RAW output formats, which can provide more flexibility and options for image processing.

The Ultra HD 16MP S5K3P9 Autofocus WDR Wide Dynamic Smartphone Tablet Camera Module1 is suitable for applications that require high-quality and high-performance image capture, such as smartphones, tablets, laptops, drones, robots, etc. The camera module has a compact size of 10.5 x 10.5 x 6.2 mm and a flexible FPC cable, which can fit into different spaces and shapes. The camera module can be easily connected to the host board with a 24-pin connector.

Share this Post: